WIT Press


On The Mechanism And Causes Of Cross Cracking In Concast Low Alloy Manganese Steel Slab

Price

Free (open access)

Volume

40

Pages

10

Published

2003

Size

670.22 kb

Paper DOI

10.2495/FDM030161

Copyright

WIT Press

Author(s)

J. Dobrovska, V. Dobrovska, K. Stransky, F. Kavicka, J. Stetina, B. Velicka & J. Heger

Abstract

On the mechanism and causes of cross cracking in concast low alloy manganese steel slab J. Dobrovska', V. Dobrovska', K. stransky2, F. ~ a v i c k a ~ , J. stetina2, B. velicka3 & J. ~ e ~ e r ~ J Faculty of Metallurgy and Material Engineering, VSB - Technical University of Ostrava, Ostrava, Czech Republic 2 Faculty of Mechanical Engineering, Brno University of Technology, Czech Republic 3 VUHZ a.s. Dobra, Czech Republic 4 ALSTOM Power technology Centre, Cambridge Road, Whetstone, Leicester. UK Abstract This paper deals with surface morphology, the mechanism of the origination and causes of cross cracking of concast low alloy manganese steel slabs. The cross cracking was identified in a steel slab with sectional size 145x1300 mm and the length of the asymmetrical cracking was approximately 600 mm. Light microscopy and scanning electron microscopy have been applied for the determination of the metallographic structure of steel and for the study of micromorphology and the trajectory of crackin

Keywords